CW Machine Worx
manufacturing and fabrication
CW Machine Worx is Company Wrench's own in-house manufacturing and fabricating company. We manufacture the Dust Destroyer, which is a leading dust control machine. We also fabricate custom parts for our equipment.
Service & Parts
heavy equipment service & parts department
We offer a full service heavy equipment shop and on-site services for all equipment. We also offer you 24 hour on-call services.
Sales & Rentals
rent equipment or buy it
We offer the ability to rent our heavy equimpent or buy depending on your situation. We offer rental rates on most of our equipment. Check out our rental rates page for pricing, terms, rental agreements, and rental applications.
2012 SANY EXCAVATOR, SY75C
Company Wrench Maintained! Open/Close/Rotate Hydraulics with Hammer Circuit, Front Dozer Blade, Enclosed Cab with AC/Heat, Cab Guard, 6'9" Arm, 12'3" Boom, 18" Triple Grouser Tracks with Bolt-On Rubber Pads.
Sale Price $45,000
2000 NEW HOLLAND BACKHOE, LB75
75HP New Holland/Iveco Engine, Enclosed Cab, 8'8" Dump Height, 110v Engine Block Heater, 6 Buckets Included (42", 88", 23", 17", 12", 35").
Sale Price $20,000
2008 DODGE 5500
300HP 6.7 Liter Cummins Engine, Automatic Transmission, Standard Cab, 11FT Auto Crane Bed, 6500LB Auto Crane, Wireless Remote Controls, Hydraulic Outriggers, Right Side Hydraulic Extend and Retract, American Eagle 45CFM Piston Type Compressor, Truck will be serviced, Federal Inspected.
Sale Price $40,000
2013 FORD F650 SD
34,000 Miles, 4 Door Quad Cab, Allison 6 Speed Automatic, 300HP Cummins Engine, 26,000LB Under CDL, 30CFM Doosan Air Compressor, 2x 7 Drawer American Eagle Toolboxes, 4x 50 Gallon Product Oil Tanks, 1x Waste Oil Tank, 1x 55 Gallon Coolant Capacity, 1x 150LB Keg of Grease, Reels and Air Pumps For All Products and Functions, Waste Oil Recovery and Blow Off Valving, Lube Box is Heated with 2 Engine Coolant Blower Systems to Keep Oils Warm Upon Arriving to the Jobsite.
Sale Price $85,000
2008 INTERNATIONAL 4400
160,000 Miles, 285 HP Maxxforce Engine, 10 Speed Eaton Fuller Transmission, Aluminum Wheels, 11R 22.5 Rubber, Truck Has Been Fully Serviced and Federal Inspected, 14FT IMT Bed, 60CFM IMT Compressor, 10,000LB IMT Crane, Fully Hydraulic Outriggers, Right Side Hydraulic Extend, 2X 8 Drawer IMT Toolboxes, 1X 18 Drawer Bolt Bin, Lube Pack Capable of 3 Separate Oil Products Plus Waste Oil, 75 Gallon Tanks, Air Greaser, Waste Oil is Equipped to Fill and Empty the Waste Oil Tank.
Sale Price $85,000
Service Techician - All Locations
Fax # 740-687-9130
Attn: HR Department
4805 Scooby Lane
Carroll, Oh 43112
Complimentary Shear Training Class
Time: 8:00 AM - 4:00 PM
Location: Company Wrench Training Facility – Carroll, OH
Space is limited! Only 20 spots are available to Company Wrench Shear Customers.
Contact: Company Wrench at 866-262-4181 for more information.