News

Company Wrench recently named Brian Baum as a territory sales manager to serve northern Florida.  He will rent and sell Company Wrench’s full line of Kobelco excavators, LaBounty attachments, Fuchs materials handlers, C.W. Machine Worx dust suppression machines, and Screen Machine crushers and screeners. Brian spent eight years selling heavy equipment in his hometown of Jacksonville before joining Company Wrench.  Brian’s enthusiasm for heavy equipment is only surpassed by his desire to see his customers succeed.  He earns the trust of customers by asking the right questions and proactively suggesting potential solutions based on his past experiences. “Brian brings a focused and driven attitude to our sales team.  He has played an important role in helping our new Jacksonville branch hit the ground running,” Cam Gabbard, President of Company Wrench said.  “I’m confident Brian will continue to strengthen our presence in northern Florida, especially with the expansion of our Kobelco dealership territory.” Please contact Brian Baum at (904) 522-3722 or b.baum@companywrench.com to learn more about opportunities to rent or purchase heavy equipment and attachments in northern Florida. Company Wrench offers the largest specialty fleet of heavy equipment in North America at 12 locations in New Jersey, Ohio, Indiana, Kentucky, Tennessee, North Carolina, South Carolina, and Florida.   Company Wrench’s Jacksonville branch is located at 4600 Phillips Highway, Jacksonville, FL, 32207.  Please visit www.companywrench.com for more information about Company Wrench’s product offering or to request service or parts support. Read More

JBI Scrap Processors in Cleveland uses four Fuchs material handlers to keep costs down and improve operational efficiency. Material handlers are one of the most important machines in a scrapyard or on a demolition site, designed specifically for moving, sorting and loading materials If an operation still uses an excavator for its material handling needs, then it is leaving several thousands of dollars on the table. Material handlers are engineered to last when constantly running in a scrapyard setting, while excavators have the potential to break down faster under the same production conditions. Designed with a straight boom, which provides longer reach than a traditional excavator, material handlers have roughly 40 percent more counterweight, giving them the ability to lift more than excavators. This means a material handler can carry heavier loads than an excavator of the same operating weight. While an excavator can be fitted with a higher counterweight to compensate, this ultimately can cause more maintenance issues in the long term. Overall, when it comes to moving materials at a scrapyard or demolition site, material handlers are the safest and most productive option. FINDING THE RIGHT FIT Fuchs, a brand of Norwalk, Connecticut-based Terex Corp., provides material handlers for use in scrapyards, lumberyards and other processing sites. With common applications in sorting scrap, feeding shredders and loading trucks, the company says it offers a variety of machines, including wheeled units, tracked units or stationary units, with a range of load capacities. Each material handler can be fitted with a variety of attachments, such as solid-tine grapples; four-, five- or six-tine grapples; orange-peel grapples; and magnets. Each grapple can be used to handle piles of loose scrap, while the magnets typically are used to separate ferrous metals from nonferrous metals during the sorting process. Recently, Fuchs released its newest innovation—electric material handlers. The company says these units offer operators zero emissions and decreased engine noise compared with their diesel counterparts. Fuchs also has introduced a new telematics system, known as Fuchs Connect. The system, which presents customers with data to ensure efficiency, can “address minor issues before they become major issues and, ultimately, decrease downtime,” the company says. Also priding itself on a variety of safety features, a height-adjustable and swiveling cab comes standard on Fuchs material handlers. The company says this is to ensure operators have a clear view of the job site when using the machine. Fuchs’ safety features, innovation and overall production are what attracted JBI Scrap Processors in Cleveland to the company’s line of material handlers. JBI—a recycler of steel and iron scrap—uses Fuchs material handlers and shears from LaBounty, a brand of Portland, Oregon-based Stanley Infrastructure, to process more than 300 tons of material daily. Most of the material is sourced from local demolition companies, office buildings and moving companies or is surplus material from construction sites and roadwork. After receiving the material, JBI sorts and cuts it to specifications using mobile shears. Using the material handlers, JBI then loads the prepared scrap onto trucks to be sent to steel mills or processing plants. JBI transitioned to using to Fuchs material handlers exclusively over the last five years. Prior to the transition, JBI typically waited several days for service requests, losing valuable time in the process. The company’s decision to switch to Fuchs was based on several factors, all of which were aimed at reducing unnecessary downtime. JBI says that with this manufacturer’s machines, it experienced faster responses to service requests, better parts pricing and improved machine performance. Given these factors, JBI purchased four Fuchs material handlers—a MHL340, two MHL350s and a MHL360—from Company Wrench. “We’ve run material handlers [from other brands], and they’re close to [Fuchs], but it all comes down to service and parts availability,” says Joe Immormino, vice president of JBI. “Company Wrench jumps through hoops to keep us up and running. They keep parts on the shelves for us. That’s what it came down to—who’s going to have the parts when we need them, and who’s going to get us up running quicker? If Company Wrench says they’re going to do something, they do it,” he adds. With operators regularly traveling around the yard, the MHL340 equipped with a grapple helps JBI increase speed and processing efficiency to load bulk materials onto trucks. As for the MHL350s, one has a grapple while the other uses a magnet. The MHL350 with the grapple remains mostly stationary to help process materials. The versatility of the MHL350 to safely handle heavier materials makes it the company’s most popular scrap handler. These four machines, along with Company Wrench’s support, are critical to JBI’s daily operations. REDUCING DOWNTIME Avoiding downtime also is key to maximizing profits at any recycling operation. Caleb Kershner, JBI’s yard manager, says he believes the ability to easily change attachments on the Fuchs material handlers is essential to achieving this goal. “All four of the Fuchs are interchangeable when it comes to attachments,” Kershner says. “If one machine goes down, we just switch attachments. We can also swap attachments based on where we need specific machines at any given time. Changing attachments takes less than 15 minutes.” JBI also values the durability of its material handlers throughout the harsh winter months in Cleveland. The comfort the machines’ cabs provide operators during shifts sets the material handlers apart from the competition, the company says. The cabs feature an air-cushioned comfort seat with a built-in headrest and lumbar support, as well as air conditioning and optional heat. “You can actually sit in them for eight to 12 hours and not feel like you want to get out and go crazy,” Immormino says. “It’s a comfortable space while you’re working.” JBI also uses an excavator from Peachtree City, Georgia-based Sany, and multiple LaBounty shears, all supplied by Company Wrench’s Cleveland branch. The LaBounty BLS2000 shear cuts rebar, while the 2000R and HDR70 cut a variety of other scrap. “We’ve had a great relationship with JBI over the past few years,” says Company Wrench Read More

Heavy demolition, scrap, and recycling jobs require quality attachments like shears.  Most shears contain a rotation motor. In this post, we outline what a rotation motor is, why it’s essential, and how you can prevent it from becoming damaged when using shears.  What is the LaBounty rotation motor? A rotation motor is a component of the shear that produces a 360-degree rotation. In a rotation motor, pressurized fluid supplied by a hydraulic pump acts on the surface of the motor’s gear teeth and creates torque on the output shaft. The LaBounty shear utilizes the rotation motor when turning 360 degrees while the jaw’s design facilitates improved penetration.  As a result, LaBounty shears provide industry-leading quality, and the rotation motor plays a vital role in ensuring that high standard.  Why is the rotation motor essential? The rotation motor is the main component that permits the shear to turn 360 degrees.  If problems occur with the rotation motor, the operator will not be able to position the shear properly.  Without full use of the rotation system, productivity will drastically decline.  What are some common ways the rotation motor gets damaged? Backdriving is one of the most common ways to damage the rotation motor.  Backdriving occurs when the shear is subjected to off-center, excessive stress.  This additional stress will damage internal components, causing the rotation motor to fail prematurely.  Why choose a LaBounty attachment from Company Wrench? Company Wrench has been the number one LaBounty dealer in the United States every year since 2004. Our fleet of excavators is designed to carry any LaBounty tool so that you can find it anywhere. We work closely with LaBounty to ensure that every unit we put into our customers’ hands is rigorously tested, checked, and tested again to assure that you are receiving the highest quality tool you will ever use. As a result, you can be sure that when you purchase or rent a LaBounty product with Company Wrench, you are getting cutting-edge customer service and support throughout the entire process. We carry an extensive inventory of LaBounty attachments, including LaBounty multi demolition processors, LaBounty shears, LaBounty grapples, LaBounty universal processors & jawsets, LaBounty concrete pulverizers, and much more. What can Company Wrench do to help you get the most out of your LaBounty shear? Since 1977, LaBounty shears have been known for their durability and productivity.  However, if you operate the shear incorrectly, it could cause unnecessary damage.  Company Wrench offers training to help keep your job site safe and efficient. We also offer 24/7 customer service and should a problem arise, most of our technicians can be on-site within 24 hours to help avoid extended delays.  Learn more about our selection of LaBounty shears and the Company Wrench advantage. Read More

Downtime is the enemy of any profitable construction project. The best way to prevent downtime is by limiting equipment damage. If you experience an unexpected breakdown, you may be forced to rent a replacement machine. These rental fees will cut directly into your bottom line and reduce or eliminate any potential profit. Downtime also affects other trades and stakeholders who are relying on you so they can complete their work in a timely manner. As your knowledgeable dealer of LaBounty, Kobelco, Fuchs, and JCB equipment, here are Company Wrench’s five simple ways to help prevent costly downtime on your next project. 1. Operator Training One of the most common causes of downtime is operator error. Training on proper machine use and maintenance routines reduces those mistakes. From a JCB skid steer to a  Kobelco high reach, proper training on how to use and maintain any equipment is key to limiting downtime. Understanding how a specific machine works before utilizing it on a jobsite increases safety and decreases the risk of downtime. 2. Only Use the Machine for its Intended Purpose Heavy machinery is powerful and impressive. However, just because a machine can do something doesn’t mean it should. In other words, the short-term benefits of misusing a machine pales in comparison to the potential long-term consequences. Operating a machine outside its intended purpose may cause significant downtime. Another common example is using LaBounty shears to cut hardened steel (ex. railroad rails). The LaBounty shear blades were not designed to cut this type of material. Using the shear in this application will drastically shorten the useful life of the shear blade. The better option is to use torches to cut hardened steel. Even though the shear may be able to cut the hardened steel, the long-term effects can be disastrous and lead to extended downtime. 3. Perform Preventative Maintenance No matter what you’re using, from a MKT pile hammer to a Kobelco excavator, without proper maintenance, safety concerns and significant damage could occur. Review maintenance documentation for both your machine and its attachments to create a maintenance plan. Keep in mind, attachments require more frequent and specific maintenance compared to base carriers. So if you’re operating a carrier with mulching attachments, you’ll want to be extra vigilant on your maintenance. Performing preventive maintenance ensures the machine operates with maximum productivity. Many machines require daily maintenance (ex. greasing and checking for wear). Applying sufficient grease is the easiest way to prevent unnecessary damage. If you don’t perform preventive maintenance, your warranty could be voided, which may lead to a dispute with a manufacturer or your dealer. 4. Don’t Operate a Damaged Machine Stop using the machine as soon as something goes wrong. Continuing to run the machine or attachment with a damaged component may be tempting near the end of a job, but it will create dire, long-term consequences. Most dealers, including JCB dealers and LaBounty dealers like Company Wrench, may be able to help reduce downtime by accessing the machine remotely to identify error codes. 5. Plan Ahead Utilize your dealer as a resource. Company Wrench is your LaBounty, Fuchs, and JCB dealer in Ohio, as well as many other respected manufacturers. If your project is especially time-sensitive, contact your dealer and come up with a plan in case something goes wrong. For example, have wear parts on hand or a technician scheduled for an inspection or maintenance to ensure maximum productivity.  Company Wrench offers training and industry-leading maintenance for every machine and attachment available on its website to help you reduce downtime. Read More

Company Wrench recently promoted Josh Hochradel to the position of branch development manager.  He will be responsible for training new hires within the parts department, ensuring inventory needs are met, and providing general support to the parts and service departments on a company-wide basis.  He previously worked as the parts manager for the company’s headquarters in Carroll, Ohio. Hochradel’s interest in parts and service started in high school when he worked at a retail parts store.  Since then, he’s held a variety of supervisory roles, as well as hands-on parts and service positions.  After working at a diesel engine repair shop for 12 years, Hochradel transitioned to construction equipment in 2020.  He made his presence known immediately with his positive attitude and drive to learn.  Company Wrench recently recognized Hochradel for implementing a new process to improve accuracy on measurements of all bucket pins.  The streamlined system allows the company to save time every day. “My previous job experiences allowed me to adapt quickly to the heavy equipment industry and my role at Company Wrench,” Hochradel said.  “I’m able to look at things from the perspective of the parts and service departments, which helps us work better together to offer the best customer experience possible.” The patience and leadership Hochradel displayed while leading the parts department in Carroll gave Company Wrench’s management team confidence in his ability to nurture growth as the company continues to expand.  He joins a team of three other branch development managers who ensure each of the 12 locations are operating efficiently. “Josh’s versatility will continue to be a great asset in his new role as a branch development manager,” Company Wrench president Cam Gabbard said.  “Since Josh joined Company Wrench as a parts manager, he’s committed himself to providing our customers with the ‘cutting edge’ of customer service.” Company Wrench offers one of the largest specialty fleets of heavy equipment in North America at 12 locations in New Jersey, Ohio, Indiana, Kentucky, Tennessee, North Carolina, South Carolina, and Florida.   Company Wrench represents a number of respected manufacturers, including Kobelco, Fuchs, C.W. Machine Worx, JCB, SANY, Fecon, Prinoth, and Bandit. Visit Company Wrench’s website for more information. Read More

Despite its microscopic size, dust can wreak havoc on demolition jobsites. The seemingly harmless particles can cause short and long-term health problems, damage costly equipment, and expose surrounding areas to dirty and potentially harmful dust particles. The best way to control dust is to utilize the highest quality dust control equipment available. Here are a few ways dust can impact your jobsite and how C.W. Machine Worx dust suppression systems can help keep it safe and clean. Health and Safety Excessive dust particles can negatively affect the health of employees. If dust is left untreated, it can be catastrophic for employees’ health, especially over long periods. The health problems that arise from dust particles are one of the most common reasons employees miss work. When employees can’t come to work, they maximize a project’s time, thus minimizing the profit. On large jobsites, dust particles can even affect the health and safety of the surrounding communities. Long-term dust exposure, specifically to silica dust particles, can result in serious health problems such as COPD and lung cancer. Such health problems minimize jobsite production and put you at risk of facing all kinds of workers comp and personal injury lawsuits. Efficient dust suppression equipment neutralizes these harmful particles to maintain a high level of safety for you and your employees. Employers and employees should consult OSHA’s Respirable Crystalline Silica Standard for Construction to ensure they always employ the safest practices on a jobsite where dust is present. Dust Suppression Systems are Efficient Dust suppression machines are more efficient than using large sprinklers and hoses. According to the Institute of Scrap Recycling Industries (ISRI), dust suppression equipment consumes 90% less water than other options and does a better job at subduing dust particles. Dust suppression machines conserve more water and are more successful in combating harmful dust particles. Standard sprinklers and hoses produce larger water droplets, which are less effective against smaller dust particles. However, dust control machines emit smaller droplets that eliminate dust particles without soaking the surrounding area and leaving you with a muddy mess. Dust Control Minimizes Equipment Maintenance Uncontrolled dust particles can create the need for frequent equipment maintenance. This is especially true for those jobsites with an excess of concrete dust. Concrete dust tends to get wet and harden on equipment, which can cause catastrophic equipment failures and expensive repairs. A proper dust suppression system will prevent premature equipment failures and reduce the rate at which your equipment needs maintenance. Stop wasting money on unnecessary equipment maintenance and invest in an affordable and efficient dust suppression system from C.W. Machine Worx. The Solution to Dust Control C.W. Machine Worx’s (CMW) fleet of patented dust suppression systems provide the most affordable dust control solution. CMW offers the DD-300 for significant dust control needs, the DR-100 for smaller, outdoor needs, and a variety of other options for everything in between. CMW also provides custom fabrication solutions to help with your jobsite needs. For more information about custom fabrication or dust suppression systems, visit our website. Read More

Prinoth initially made a name for itself as an industry-leading manufacturer of snow grooming vehicles.  In 2009, Prinoth expanded its operations by producing a line of tracked utility vehicles capable of safely navigating nearly any terrain.Two years later, Prinoth introduced a series of vehicles and attachments dedicated to the vegetation management industry.  Prinoth spent the next decade perfecting its designs to offer customers unmatched production, quality, and versatility which is why at Company Wrench, we are proud to be a certified Prinoth equipment dealer. What Prinoth Tracked Vehicles Offer Prinoth offers state-of-the-art designs that suit a variety of needs in a number of sectors. These are the features that set Prinoth tracked vehicles apart from the competition.Ease of Use Prinoth Panthers are easier to operate than any other tracked-utility vehicle on the market. The cab was designed to resemble a commercial truck with a steering wheel and pedal, which makes it broadly accessible to new and veteran operators alike. Versatility In addition to their high payload and hauling capacity, Panther vehicles are capable of transporting almost any tool across difficult terrain.  Using a truck-style chassis normally reserved for on-road trucks, Prinoth Panther vehicles may be paired with anything from vacuum excavators to wood chippers, or power generators to cranes.  The Panther’s extreme versatility makes it the perfect resource to tackle even the most daunting project. Undercarriage Design Prinoth’s undercarriage embraces a variety of features to save customers valuable time and resources. Here are a few of the ways Panther’s design is distinguishable from competitive models:   The open undercarriage reduces clogging and promotes unrestricted movement.  The wheels and pivots do not require daily greasing, substantially reducing daily maintenance obligations. Operators no longer need to manually adjust track tension.  Prinoth’s track tensioning system automatically adjusts to the environment and terrain.   Prinoth utilizes larger (but fewer) wheels and rollers to create low ground pressure.  This improves control and suspension when navigating softer terrain.  Productivity All of Prinoth Panther’s external features were designed with one clear objective — maximizing productivity.  Prinoth Account Manager Nick Schwartzbauer says, “Our customers are most impressed by the increase in productivity when they move from another crawler into a Panther.  That is coupled with lower maintenance costs, both of which result in an immediate and positive impact to their bottom line.”     Prinoth and Company Wrench Partnership Company Wrench has been a Prinoth dealer since 2017.  The partnership has grown annually and experienced tremendous success in 2021.  Both companies are enthusiastic about Prinoth’s recent updates to its legacy fleet, which have increased speed, payload size, and overall productivity.  Company Wrench is also excited by Prinoth’s continued investment in the vegetation management industry.  With Prinoth’s recent acquisition of Jarraff, an established manufacturer of land-clearing and tree care equipment, Company Wrench believes the parties are well-situated to serve the unique needs of this emerging market.  We are proud of our partnership and love being a certified Prinoth equipment dealer. An Industry First Both Prinoth and C.W. Machine Worx (CMW), the manufacturing division of Company Wrench, are known for offering unique, innovative customization options.  In October, the companies partnered to deliver the ground-breaking mobile dust suppression unit, the Prinoth Panther T16 Dust Suppression Machine. CMW’s DE-200 was mounted on a Prinoth Panther T16 to provide dust suppression support on a highly regulated demolition project.  With Prinoth’s guidance, CMW’s in-house engineering team planned, designed, and executed the final product to perfection. “It’s the first time we’ve seen a machine like that go out into the market,” Schwartzbauer said.  “We’re hoping it demonstrates how Prinoth products can be used to overcome obstacles on the jobsite.” Visit Company Wrench’s website to learn more about the wide range of attachments that can be used in collaboration with Prinoth’s line of tracked utility vehicles. Certified Prinoth Equipment Dealer For nearly twenty years we have been a leader in the heavy equipment industry so you can trust us for all your Prinoth equipment rental and sales needs. Visit any of our locations or contact us to learn more about Prinoth tracked utility vehicles and our available financing options. Read More

Company Wrench is pleased to announce the opening of its newest branch in Jacksonville, Florida.  The Jacksonville branch offers new and used equipment for sale and rent in the general construction, demolition, scrap, and recycling markets.  This branch is equipped with full parts and service departments, capable of assisting customers with multiple product lines.  The branch also allows Company Wrench to expand its KOBELCO dealership to northeast Florida and southeast Georgia.  KOBELCO previously named Company Wrench the official dealer for central Florida in 2020. “Our Lakeland branch has proudly served Florida for over 10 years.   Opening the Jacksonville location provides a tremendous opportunity to serve new customers in another thriving market,” said Cam Gabbard, the President of Company Wrench.  Mr. Gabbard added, “This is also a significant development in Company Wrench’s partnership with KOBELCO.  The expansion of Company Wrench’s territory means even more customers will enjoy the benefits of the outstanding KOBELCO product.” Company Wrench’s newest branch is conveniently located at Phillips Highway in Jacksonville, Florida. Please contact Stephen Bone for service, Stephen Shapp for parts, and Brian Baum for sales and rentals. Company Wrench’s “Cutting Edge” Customer Service is also available 24 hours a day, 7 days a week, by calling (904)430-3274 or visiting www.companywrench.com. Read More

Fecon Forestry Mulching Highlights Fecon has dispelled the notion that longevity is a precursor to leadership.  In just 30 short years, Fecon established itself as the industry leader in forestry and land-clearing equipment. From Stumpex stump grinders to FTX mulching tractors, Fecon has the right machine to tackle any project with confidence.  Boasting unmatched levels of performance and reliability, Fecon’s equipment ensures projects are completed efficiently with minimal clean-up.  For these reasons, Company Wrench proudly offers Fecon’s full line of forestry and land clearing equipment at select locations across the country. Bull Hog Fecon’s Bull Hog is the perfect tool for cutting down brush, trimming trees, and taking stumps down to grade level. With three different rotor designs, there is a Bull Hog fit for every occasion. This top-of-the-line mulching attachment can be mounted to excavators, skid steers, and hydraulic machines. One of Company Wrench’s favorite configurations is the FTX128 tractor paired with a BH85 mulching attachment. FTX Tractors Fecon’s specialty tractors were engineered specifically for the forestry industry.  The FTX128, FTX150, FTX200, and FTX300 closed-cab tractors allow customers to transition between attachments, making them perfect for land clearing projects.  Backed by Company Wrench’s “cutting-edge” service team, Fecon’s tractors are perfect for projects of any size or duration.   Stumpex The Stumpex is the most durable stump clearing tool on the market. This stump grinder can be mounted on skid steers and backhoes with hydraulic output of at least 20 GPM.  It can also be mounted on 20 ton-class excavators with hydraulic output of at least 30 GPM.  This low RPM, high torque attachment destroys stumps of almost any species or size.  For example, the SHX33 model removes stumps 8 to 28 inches in diameter with a single bore and removes larger stumps with two or more bores.  Fecon Equipment Rental and Sales Fecon’s expertise in the forestry and land clearing industry is apparent in every machine it designs.  Company Wrench’s sales representatives, technicians, and support specialists are trained to operate, service, and maintain Fecon tractors and attachments. If minimizing maintenance costs and maximizing production are important to your business, please contact Company Wrench for more information about Fecon equipment sales, rentals, parts, and support.   Read More

The year of 2020 was undoubtedly a difficult one for so many, including many of our Company Wrench customers and partners. As the holiday season comes upon us, we are proud of the “gifts” we continue to implement as a way to continue going above and beyond for our customers.  Even through the toughest of times this year, Company Wrench customer service continued to serve as one of the best gifts we can give to our customers. Whether it is the routine inspection of equipment and attachments or timely replacement of parts, the Company Wrench Service Team is always ready to make sure our customers receive the best support and training possible to keep their machines up and running.  Aside from our unbeatable service, we proudly offer the “gift” of thousands of parts in stock to replace or upgrade our customers’ machinery. From Kobelco to MKT, our customers can rest assured that we will be able to recommend and deliver the right, quality parts at competitive prices. Your time and money are extremely valuable when it comes to your project, which is why you won’t need to worry about wasting either researching the right parts and equipment. Our Product Support Specialists are here to help in whatever way you need to get you the right tires, blades and more.  Everyone loves a custom gift, and our customizations are one of the best perks we offer our customers. At our state-of-the-art manufacturing facility, we can provide full customization and fabrication for your machines and attachments. This means that no matter how complicated your project, we can work with you to find a solution that will meet your needs.  Throughout 2020 and beyond, our team has taken pride in the support and expertise we have been able to provide to customers across the nation. As we look forward to the coming year, we will continue to strive to deliver the “The Cutting Edge of Customer Service” and continue to provide innovative solutions as an industry partner.  We want to wish all of our Company Wrench customers and partners a wonderful holiday season, and look forward to working together in 2021.  Read More

During this time of giving thanks and reflecting on how Company Wrench is able to help so many industries and projects, we are especially considering the importance of jobsite safety.  We know that our customers need the highest quality of machines, attachments and service available. Not only is all this important for a successful, efficient project, but for the safety and protection of all those working on the jobsite. This is why we proudly offer the best equipment and parts from brands like LaBounty, Terex Fuchs, JCB, Kobelco, MKT, Bandit, Fecon, and more for rent or sale nationwide.  In addition, we offer all of our customers access to CW Machine Worx, our in-house manufacturing and fabrication company that can engineer and customize different machinery for demolition and construction equipment. With our custom systems, we can make sure that our customers have the right equipment to fit the unique needs and specifications of their project. When a jobsite uses the proper equipment and machinery, the safety of each worker is better ensured.  We understand the importance of lending a helping hand when something goes wrong or needs to be thoroughly inspected. Our superior Service Team is available 24/7 to head out to your jobsite, inspect any malfunctioning equipment and make the right recommendations to keep you up and running. Our technicians will also be sure to help replace any needed parts to keep your machines as safe and efficient as possible.  No matter how you need us, Company Wrench is ready to help you create the safest jobsite with the best machinery, parts and service knowledge for your project. We are thankful that we are able to help so many customers across a variety of industries achieve the highest level of safety and site management through our various services.  Contact our team today to learn more about our equipment sales and rental options as well as our heavy equipment services.  Read More

A wide variety of industries and types of businesses need heavy machinery they can count on to get the job done. That’s why Company Wrench is proud to have the equipment and attachments for any job in almost any industry. Take a closer look at some of the industries we serve! Demolition We offer a wide variety of demolition equipment and attachments to help you get your job done as quickly as possible. Some of our most popular machinery includes our high-reach units, specifically for 50-100’ working ranges. We provide multiple options for Working Ranges and Tool Packages to meet the needs of our customers. Many customers are referred to Company Wrench when other competitors cannot meet the needs of contractors who are looking for specialty items.  We also provide Multi-Use packages, which are fully-equipped machines specific to the Demolition industry. We are able to configure machines from our fleet to match customer’s job requirements with minimal changes due to the way we prepare our fleet with Full Hydraulic Kits, Couplers, Machine Guarding, etc. Our machine offerings often enable customers to get work done in record time by allowing them to swap tools quickly and improve their production with fewer machines on site. LaBounty demolition equipment is some of the best in the industry, and we carry a wide range of Labounty Tools designed for every demolition application. We can provide customers with a variety of shears, processors, pulverizers, grapples and more to meet their requirements. We will even match Kobelco Excavators and Labounty Tools to fulfill whatever they may need. Construction For our customers looking for machines, attachments and expertise for their construction projects, we offer the best solutions and options in the industry. Take a look at some of our most popular machines:  SK500LC With 2nd Member 16,000lb. Impact HammerThis machine offers superior performance on removing rock, and is often needed in areas where blasting cannot be done or in a restricted area for a very large carrier. This package is much cheaper than then mobilizing a large carrier that can handle a 16,000 lb. hammer, 3rd member. Kobelco Carrier With Transverse Drum from AntriquipCustomers use this machine as an effective way of removing rock or spongy slate in place of a hammer package. It is suitable to work near structures and pipelines that could be affected with the constant impact of a hammer, and can be utilized to only remove a certain width of material. Kobelco SK350 with MKT Pile Driver, V2Esc, V5Esc and V8EscNumerous job sites need shoring or piles installed before the work can even begin. Our service team has the support and training from MKT to help contractors out with this equipment and to make sure proper safety measures are in place until permanent structures are built at the site.  Landscaping Finding the right partner in your landscaping project is essential to making sure your work is completed effectively. Company Wrench is able to offer the top landscaping machinery and attachments to make sure our customers have a successful project.  JCB has long been recognized as one of the top construction equipment companies in the world, which is why we always recommend one of their machines for major landscaping projects. The JCB 407 is able to be used in any landscape yard application such as moving out gravel and rocks or being equipped with snow removal equipment for the winter months. Being able to use the machine year-round offers customers a great return on investment. Another one of our favorite machines is the JCB 3TS-8T, which is equipped with a Tier IV final engine, extra dump height and forward reach. With these specifications, customers are able to load into and reach over things that the common compact track loader could not. The unit is also equipped with High flow hydraulics allowing multipliable attachment use. Finally, the JCB 505-20 is one of the best for landscape material yards. With this machine customers can unload a truck from one side in the tightest of areas with the tight turning radius. The universal skid steer mount also allows for use of a wide range of skid steer attachments that customers may already own.   Company Wrench: Your Industry Partner Our experts are also able to provide a variety of machinery for industries such as Dust Suppression, Scrap and Recycling, Forestry and Oil. Our experience within so many industries allows us to provide service for almost any customer completing any project.  Not only do we have the right machines and attachments for your project, we have the knowledge and in-depth expertise of our Service Team. Our technicians are able to provide repair and maintenance services 24/7 to keep your machinery up and running and reduce downtime with your project.  No matter the scale of your project, Company Wrench can provide the necessary machines and attachments to keep you on track and as efficient as possible. Explore our different equipment rental options or speak to a member of our team today to learn more about us.  Read More

Company Wrench knows how important it is to have the right parts to keep your machines and equipment up and running. When a part fails or breaks, finding a replacement is essential to keeping your project on track and as efficient as possible.  So, why buy parts from Company Wrench? Two words….Cutting Edge. What does that mean? The Company Wrench Parts Department provides the “Cutting Edge of Customer Service.” It’s not just a catchy slogan, it’s our way of life. We make your needs our priority. We strive to provide you the best parts at competitive prices all while providing customer service that is second to none. We take pride in going the extra mile to ensure you are getting the best bang for your buck.  The Parts Department at Company Wrench is your best resource for quality replacement parts for any brand-name machinery. We make sure to ask the right questions in order to get you the right parts the first time, and make it our mission to reduce your downtime and get you back up and running as soon as possible. Here are some of the big brands you can count on us for when it comes to parts and certified technicians: LaBounty (we are the #1 LaBounty dealer in the world, with the largest blade kit and parts inventory in the world).FuchsKobelcoJCBStanley MKT Prinoth Bandit  Our range of inventory and convenience of 10 different locations guarantees that you will always find the part you need and be able to get it as quickly as possible. With everything from LaBounty parts for shears, grapples and more, to parts for larger machinery such as Kobelco, JCB and Fuchs, we will be able to help you find the best new and used parts for almost any make and model you may have. Our maintenance contracts will also make sure your equipment is always being serviced and inspected by experts routinely to make sure you don’t run into any unknown issues during your project. We stock a large inventory of OEM replacement parts for our major manufacturers, ensuring you the best quality and exact fit every time. Company Wrench also offers a large variety of Ground Engaging parts, such as cutting edges and bucket teeth. Our portfolio also includes aftermarket solutions for items such as  Undercarriage Components, Starters, Alternators, A/C Components, Fleetguard Filters, Hydraulic Pumps and Motors, Hydraulic Cylinders, Cab Glass, Seats, Mirrors, Cab Guards and much much more. With our wide network of partners, we can get parts for most makes and models on the market.  We’re proud to offer the unmatched service of our Parts Department who can help guide you through the process of finding the correct part for your machine. Our PSR’s can save you the hassle of trying to research what’s best for your machines and attachments. They also know that downtime costs money and will work hard to get your machines and attachments back up and running. They are available 24/7 to get you the parts you need. Find one in your area who can work with you today!  From time to time, Company Wrench will run special pricing programs or free shipping incentives for our customers. Make sure you’re on the lookout for our annual Labounty Blade Kit Special, special pricing on complete PM Service filter kits, A/C tune up specials and much more! When your machine or attachment is in need of repair, you need both the quality parts and top-notch service to make sure you get back up and running. That’s what sets Company Wrench apart. We will act as a true partner in your project with our expertise and guarantee you parts and equipment that outlast competitors. See for yourself! Call for a quote anytime and learn more about our parts offerings and by contacting our Parts Team today. Read More

Kobelco is undoubtedly a top brand when it comes to excavators. This is largely due to their commitment and focus on manufacturing only excavators that are strong, reliable, and highly valuable for their owners. Company Wrench has some benefits and highlights of these machines to share for owners to keep their eye on for upcoming projects.  Kobelco excavators are built with a multitude of features aimed at improving both operator and project efficiency. Kobelco excavators have standard safety features such as swing flashers,and FOPS top window guards. Other features such as independent travel, swing priority, heavy lift, boom regeneration and power-boost that is not time limited that are often an extra cost in other brands of excavators.  Swing Flashers are standard on all Kobelco machines and have been for many years. This feature allows personnel working around the machine to clearly see that the operator is swinging, and they may need to stand clear. It also defines where the machine and specifically counterweight is when approaching from the rear in dark or low light conditions.Independent Travel allows the operator to move the machine around the job site while lifting the boom and arm to the full lift chart in a smooth, controlled manner. Some competition will either stall on some functions or stop moving all together. Boom regeneration pushes oil from the boom cylinders directly to the arm cylinder when arming out, and lowering the boom to get back into the ground for digging. This allows for decreased fuel burn and faster cycle times.   There are a number of Kobelco excavators detailed below that Company Wrench suggests to those getting ready for their next excavation, demolition, scrap project or operation.  Kobelco recently introduced the SK210HLC-10 Hybrid with a fully electric swing motor controlled by a lithium ion battery. This is meant to help increase productivity and cycle times as well as reduce fuel costs. Other manufacturers have built hybrid machines that increased fuel economy, but they in turn decreased the excavators productivity. Kobelco’s hybrid excavators have been able to reduce fuel consumption and increase productivity! Kobelco addressed a need in the demolition market by introducing three sizes of specialty demolition excavators (SK350D, SK400D and SK550D) for the North American market with a high-reach demolition front and three-piece “separate boom” to give the operator additional reach where a standard machine would fall short. These fronts can be exchanged in under an hour with minimal  tooling. This allows the operator to more efficiently work with demolition tools at a higher height range (up to 93 feet with the same machine)! The SK140SRD and SK210D Multi-Dismantling machines are factory purpose built, specialized machines that quickly and efficiently remove valuable metals from end-of life vehicles for more complete recycling.  With a combination of power and precision, these machines can remove engines, copper wire and aluminum with speed and ease, generating increased revenues for the automotive recycling industry. Even though these machines are made for harder, unique and specialized applications, Kobelco still offers their standard 3-year, 3000 hour full machine warranty. Kobelco is relentless in Research and Development, constantly interviewing customers and dealers to learn what the market demands are and is expecting. All this information is compiled with requests and comments from other markets around the world to improve Kobelco’s excavators’ performance and abilities. Company Wrench has been a leading Kobelco dealer for years, and understands the quality and workmanship that goes into these amazing excavators. Contact Company Wrench today to learn more about Kobelco excavators and how Company Wrench’s  Service Team can help you get ready for your next project! Read More

Fecon is a market leader in mulching equipment and attachments. For your outdoor projects this season, Company Wrench has the equipment you need to make them a success.  Fecon manufacturers mulchers in their Lebanon, Ohio facility for a worldwide market. Fecon makes sure to listen to their customer’s opinions and ideas about the equipment they offer to continuously improve. In addition to the significant technological advantages of Fecon’s “Power Management System” in all machines they offer, Fecon also offers several rotor choices and tooling options for their mulchers so that a contractor can choose which is best for their application. They can even vary their teeth per the specific conditions of their job.  Fecon has more mulchers in the woods than anyone in the U.S., which means they have the most experience building and supporting them. In short, the technological advantages, the experience, and the fact that Fecon mulchers are proudly made in the USA are a few of the reasons why Fecon and Company Wrench are the right choice to provide the best equipment solutions for your application. Company Wrench suggests these machines and attachments as “must-haves” for your commercial and residential projects: Tractors Fecon’s purpose-built mulching tractors have three different horsepower levels to handle any job size. FTX128 128HP mulching tractor with BH85SS mulching attachmentFTX150 140HP mulching tractor with BH85SS mulching attachmentFTX300 300HP mulching tractor with BH120 mulching attachment Mulching Attachments Whether there is just a long fence row that needs removed or trimmed, or a large acreage clearing project, Fecon attachments are available for any job. Skid steer mulching attachments BH74SS High Flow Mulching attachmentsStumpex High Flow stump grinderFecon deck mowers (available in three widths)Excavators with mulching attachments Fecon’s machines and attachments are guaranteed to help contractors finish a project more quickly and efficiently. Fecon’s proprietary Power Management System includes a microprocessor that reads and relays grinding information back to the machine at all times and instantaneously adjusts the engine and hydraulic pumps in real time. This produces both maximum productivity and the best possible fuel economy for the machine. Coupled with this intelligent system is a variable displacement powered mulching head, which will “downshift” when more torque is needed and return to faster spinning mode in smaller brushy material. This combination of Power Management and variable displacement hydraulic motors provides a well-orchestrated symphony of performance that outperforms any competitors, and can be described in comparison as “blowing a horn.” Company Wrench’s service department is available 24/7 to service Fecon Machines and attachments. Our parts department keeps OEM Fecon parts in stock and ready to go at a moment’s notice, to keep the customer up and running. Contact us today! Read More

Spring has arrived, and you’re probably getting ready to tackle some new demolition projects. This means you’ll need the best, most reliable tools for the job. At Company Wrench, we have a list of some of our must-have tools and attachments to make sure your project is a success. We recommend securing: A CW Machine Worx dust suppression unit that allows you to adhere to the Silica mandates that are now present in many areas of the United States. A LaBounty MDP or Multi Demolition Processor to crush and process concrete quickly and easily.A High Reach Excavator from Company Wrench. A LaBounty MSD Shear for steel structures.A LaBounty HDR Grapple for cleanup. Investing in the proper tools for your demolition project ensures increased safety and overall success. Trying to bring down a structure with the wrong equipment could end up costing you more time and money if you don’t have the right tool for the job.  Company Wrench stands behind our equipment and makes sure that every piece we provide to our customers is fully serviced and ready to work. Each unit is put through a thorough inspection process and is tested prior to going out to any customer. If the unit fails any part of the inspection, it will not go.  Our Service Department is available 24/7 to provide support and make sure you don’t experience any delays with your demolition this spring. Contact us today to learn more about the right tools for your project. Read More

Spring weather is quickly arriving, and Company Wrench wants to make sure your Kobelco excavators are good to go for their first use after winter. Whether you are a professional in demolition or a homeowner getting ready for your first big project, it is important to take the proper steps to ensure the best operation of your excavator as possible.  Company Wrench sells and rents the popular SK140SRLC-5, SK210LC-10 & SK350LC-10 models of Kobelco excavators. Our customers tend to prefer these machines because they are equipped with a bucket that can ship in one load, meaning it can unload and immediately go to work. Larger machines typically require additional trucks and a technician to assemble. These are some of our best tips to ensure your excavator is ready for whatever job you need it to handle this spring. Over time, water and sediment can accumulate in the fuel tank, leading to clogged fuel filters or eventually damaging your fuel delivery system. Be sure to drain the water out of the bottom of the tank and fuel water separators to avoid costly downtime. Your operator will definitely be happier in a cool cab. Check over your air-conditioning operation and make sure your belts are tight and in good condition.  Check for any hydraulic, engine or water leaks that may have shown up during the winter months. If you notice a leak, you can contact your local Company Wrench service department. We can provide you with expertise and any parts needed to get your machine back to work.  Top off any fluids that may be low, including swing and final drive levels.  Take a look at your wiper blade to make sure it’s free of tears and hasn’t hardened over the winter. This will make sure your operator always has a clear view. If you need to replace your blade, it will take no more than five minutes. You want to make sure your work lights and travel alarm are fully operational before your excavator goes to work. Be sure to carefully check over both. We understand how important it is that your Kobelco excavator is ready to go as soon as possible. Company Wrench aims to go above and beyond when servicing your machine and will do everything we can to get parts and equipment needed to have your excavator up and running.  Learn more about our Service Department and contact us today! Read More

JCB has long been heralded as one of the best brands for heavy machinery. A family business since the late 1940s, JCB was the first to invent the backhoe loader back in 1952. This machine revolutionized the industry. JCB went on to create products such as the Telehandler, Hydradig, Telescopic Skid Steer, and the all-new 1CXT, a track loader with the capabilities of a backhoe. Why are these machines so amazing? It all comes down to the thought that JCB puts into its function and design. JCB stays ahead of the changing demands of the construction, demolition, and other industries. JCB machines have some of the lowest cost of ownership and are in high demand around the world. JCB units also do not have a need for DPF filters, this means more uptime, and more efficiency throughout the entire project. In addition to simple innovation, JCB focuses on operator and job site safety. JCB track loaders and skid steers have a side open door which deviates from the traditional front doors these machines. This saves people from having to step over the front of a bucket and reduces accidents and falls. The iconic powerboom loader arm provides 60% better visibility than other machines in their class. As a company never satisfied with the status quo, JCB continues to develop technology for the future. JCB recently launched the 1CXT—a tracked backhoe that combines the best features of a skid steer with the functionality of a mini-excavator. They also introduced the JCB 2TS which is a smaller version of the award-winning 3TS teleskid. The 2TS is the first and only small platform teleskid with a telescoping boom. The boom features 12 feet of lift height and a 7-foot forward reach. Both the teleskid line and the 1CXT are like nothing the industry has seen before. With these and other products, JCB continues to push the envelope on design, quality, and safety. Company Wrench stands firm behind the JCB brand and can help you find the perfect machine for whatever your project calls for—from backhoes to excavators to wheel loaders and beyond.  Company Wrench is a top dealer for the JCB and offers certified JCB technicians, as well as a knowledgeable parts department with availability on a huge selection of JCB parts. Call today to find your next JCB machine from Company Wrench! Read More

It’s February, which means love is all around us. And it’s time to fall in love once again—with your heavy equipment. Whether you’re in the demolition, construction, landscaping, or other industry, you deserve to love the heavy machinery and attachments your company rents or buys. Here are some aspects to consider when looking for your dream piece of equipment. Features You probably had a list of criteria in your mind when you chose your dream car or were looking for your dream spouse. So, it makes sense you would have an ideal list of features in your dream machinery. Company Wrench carries the best brands of machines and attachments with all the latest features. We can also customize your existing equipment with new features like cab risers, counterweights, track widening, and much more. You should love every feature of your heavy machinery, and Company Wrench is here to ensure you do.  Initial vs. Long-Term Cost The buy versus rent dilemma can be a difficult one to navigate. When considering a piece of heavy machinery, both the initial and long-term (operating cost, storage, maintenance) costs should be reviewed. Keep in mind, although you may not love the upfront purchase price, any long-term savings could mean you feel more love for your heavy equipment over time. On the other hand, you may love the savings you get by renting as the need arises and never paying for machine storage. But don’t worry; with Company Wrench, you’ll always love the value of the high-quality machines we sell and rent. Maintenance Love is a verb; it’s something that takes work and action to sustain. Owners and operators of heavy equipment will need to show that same active love to their machines and attachments by performing regular maintenance. When picking your machine or attachment, ask us about the maintenance requirements to ensure the machine will meet your needs. For example, some machines may perform better in winter without additional maintenance while others would require increased servicing. It’s important to understand what you’re getting into to ensure you love the machine or attachment you pick. Operator Knowledge Renting heavy equipment means always getting a chance to use the latest models with enhanced features you’re sure to love. But what about being able to operate these machines? When you buy or rent from Company Wrench, you don’t have to worry about having equipment operators already familiar with the new machine. We can help your employees with learning to manage any equipment we supply. We even make sure to include detailed instructions on how to service each piece of equipment you buy or rent to ensure top performance at all times. It’s easy to fall in love with your heavy equipment when you purchase or rent from Company Wrench. Call us today and let our experienced team lead you to the perfect machine match! Read More

Merry Christmas from Company Wrench! Click below to listen to our talented team as we count down the top 12 heavy machines and attachments rented or bought from Company Wrench in 2019. Whether you need ten breakers breaking, six Fecons chipping, or a single high reach machine, Company Wrench has your construction and demolition machine and attachment needs covered. Call Company Wrench today! Read More

Every company wants the best candidates for the job. When it comes to operating heavy machinery, you want skilled and knowledgeable operators to handle your construction or demolition project. Other than operating forklifts and manlifts, OSHA does not have basic qualifications for heavy equipment operators. This means that a combination of natural skills, characteristics, and on-site training are what make the best machine operators. Looking for a new machine operator? If you’re looking to hire a machine operator, there are many characteristics and skills that can set someone ahead of the competition. The best operators are self-motivated with strong problem-solving abilities. They take personal pride in their work and have a strict attention to detail. Skilled operators will pick up the movements and flow of the operation quickly. They have good body-awareness and can coordinate their eyes, hands, and feet to subconsciously make the machine perform as they want without having to think about every movement. This is particularly important when running 3rd Member Hammer Bracketsand wrecking attachments on high reach machines. Many people have natural skill and understanding when it comes to operating machinery. People who grew up on farms make great operators, as they often are exposed to heavy equipment early and get to see how it works and functions. They learn how to use their body and the machine together naturally. Patience is another virtue of a good heavy equipment operator. When wrecking, processing concrete, or running a hydraulic hammer, operators must understand that the only way to eat an elephant is one bite at a time. A previous customer called us after breaking three bits on their Stanley Hammer MB100. Thinking the hammer was defective, we sent a technician to them to evaluate the machine. After a few minutes, they saw the problem and were able to offer training and explanation to the operator to keep production going with no downtime or expensive bit replacements. Unfortunately, it’s true that not everyone will make a good heavy equipment operator. Operating equipment needs to become a fluid process with brain and body fully in sync. Naturally good operators will pick up these movements and operate the machine with ease. Becoming a Better Machine Operator For machine operators looking to increase their abilities, time and experience are your best teachers. Get lots of practice and exposure to new machines and techniques. If possible, start young and see if there are instructional classes or experts offering tutorials or continued training. While it may seem like an excavator is just an excavator, technologies are changing, and new techniques and operating procedures can help save on fuel and increase power. Don’t be shy about asking for advice and education from senior operators or your site/plant operator. They want to have the best operators possible and will be happy to show you how to make the machine run at its highest performance level for the best production and safety. When operating a crane or high reach machines, it is particularly important to have training and experience beyond a beginner level to ensure safety and reduce the potential for an accident. Excavator work near utilities requires a higher-than-normal level of patience. Grading operations with a tolerance of ½ inch or less require training, experience, and a high degree of skill. Graders and dozers for finish production are simply not machines anyone can hop in and begin productive operation. How Company Wrench helps your workers be the best heavy equipment operators around… While most workers can pick up the skills necessary to be an excellent heavy equipment operator, there are limits to what time and experience can teach. That’s why Company Wrench is clearly different from other machine sales and rental companies. With every sale and rental, we provide you with an equipment trainer and mechanics who offer operating techniques, maintenance tips, safety training, and other working procedures. We don’t just sit you down in a classroom or hand you a manual. Our expert trainers will explain the function while actually getting in the driver’s seat and showing you the mechanics of the operation. This teaching methodology increases production and improves the overall safety and performance of the machine. No one wants to buy or rent a $500K or $1M machine only to have an inexperienced operator handling it. We are able to get the operator comfortable with the machine and guide them on what to do and how to do it. Our customer service improves your machine performance, increasing productivity, worker safety, and your bottom line. And the training isn’t finished when we leave your job site. Our mechanics give out their direct lines and renters or purchasers can call any time there is a problem or they have a question. A simple phone call can often save time and money. Buy or rent your next machine from Company Wrench and experience the difference our machine operator trainers can make to your operators. Whether you’re looking to hire a new operator or train your existing operators, Company Wrench has what you need. Read More

If you rent or own heavy machinery, then you need to face the reality that winter is heading this way fast and you need to prepare. What happens to machines as temperatures drop? What preventative steps should you be taking before running machines in the winter or storing them until spring? To keep machines running well throughout the colder months, follow the advice of Company Wrench. Many machine parts can be affected by cold weather. The cold will drain the energy from machine batteries. It can also interfere with the fuel system. If water is present in the fuel system, it can turn to ice and create low fuel pressure. For the general construction, demolition, and scrap industries which operate year-round, this can pose problems. If you do use heavy machinery in the winter, to keep it up and running in peak condition you should: Treat the fuel during extremely cold conditions to avoid fuel gelling,Drain the fuel/water separator daily,And fill the fuel tank after the shift to prevent moisture from entering the fuel tank. Other industries, such as agricultural businesses and farms, slow down in the winter and need to store their heavy machinery. There is some simple maintenance you will need to perform before storage time to ensure your machines are ready for spring thaw. To prepare your machine for spring, you should: Treat the fuel system and keep the fuel tank full,Disconnect the batteries to remove any unneeded draw from the machine’s onboard controllers or GSP devices,Apply grease to any exposed cylinder rods to prevent rust,Drain any water or sediment from the bottom of your fuel tank,And power wash the machine. During storage, you should exercise the machine at least once a month to work out any air that could have entered the hydraulic system. This will also charge the batteries. If you want help prepping your machine for winter usage or winter storage, call Company Wrench. Company Wrench runs a fleet of fully stocked service trucks to help prepare for cold weather operations or storage. Our Service Department can also help if your machines suddenly break down this winter. Call us today! Read More

When it comes to heavy machinery for demolition and construction, Kobelco has been leading the pack in innovation since 1930. Throughout their history, Kobelco has pioneered new technology and their reliable excavators are used throughout many industries today. Kobelco was the first company to successfully introduce hybrid technology for excavators. Hybrids reduce fuel consumption by nearly 15% which allows more uptime, and better performance. Kobelco also created iNDr which means a quieter, cooler and cleaner experience. The low noise emission is ideal for urban environments, and the cooler engine improves reliability as well as reduces downtime. Kobelco offers a wide range of excavators. Among them, they offer 2 long reach machines that work well for dredging ponds, as well as lifting heavy loads from long distances. The manufacturing arm of Company Wrench, CW Machine Worx, can help with conversion services to turn your standard Kobelco excavator into a high reach or long reach machine. Another machine that Kobelco offers that is unique is the Kobelco SK210 Auto Dismantler. This machine is designed to take apart vehicles, engines, and other components. This machine increases productivity and allows for the user to dismantle up to 45 more cars vs traditional methods in the same time frame. With a wide variety of machines to choose from, Kobelco is a player in all markets. From homeowners to demolition, farm use to construction, there is a machine for every need. Kobelco machines are the perfect balance of power, efficiency, and design. Many of the Kobelco models are built in the USA in the state-of-the-art Kobelco facility in South Carolina. For more information contact Company Wrench. Read More

C.W. Machine Worx, the manufacturing arm of Company Wrench, offers custom conversions for your heavy equipment and machinery. From long reach and high reach fronts to specialty counterweights, joystick and cab modifications, and much more, a custom conversion may be just what you need for that specialty project. The question of whether to rent or purchase any type of equipment largely depends on usage.  Deciding whether to rent or purchase a specialized excavator is no different.  If your company only occasionally requires specialty equipment, renting on a case-by-case basis is probably the prudent choice.  Conversely, if your company regularly needs an excavator with considerable vertical or lateral reach, purchasing a custom machine could result in substantial savings over time.  C.W. Machine Worx offers a third option that allows customers to enjoy the best of both worlds.  For example, our stub boom conversions can be utilized with both high reach and long reach fronts. If a company regularly demolishes tall buildings, it may be wise to invest in a custom high reach conversion package (a stub boom and high reach front). This package allows the same company to switch out the high reach front they own for a rented long reach front, when necessary. The ability to use the high and long reach fronts interchangeably is not only convenient but may also save on future rental costs. Purchasing a specialty machine directly from a manufacturer can be very expensive. By converting an existing machine, your company lowers their acquisition cost to allocate their investment over time. It’s also possible the manufacturer cannot provide the exact custom configuration for your existing machine. CW Machine Worx’s engineering team is able to design and build just about any custom conversion imaginable. If design data for a particular machine isn’t available, C.W. Machine Worx can reverse engineer your request and apply it to almost any existing machine.  We have an extensive custom conversion database for Kobelco, Komatsu, Dooson, Terex, CAT, and Hitachi excavators, as well as Fuchs material handlers. The time required to engineer and build a custom conversion is directly related to the scope of the project. Smaller projects can be completed in 3-4 weeks, while larger projects may require 3-4 months. By commissioning a custom conversion from Company Wrench and CW Machine Worx, you get the best of both worlds. Not only do we design and build your custom machine, but we also help you use, maintain, and repair it. When it comes to custom conversions, no one has the experience we have. Call Company Wrench (or C.W. Machine Worx) for your next custom conversion project! Read More